Follow these steps to install the software via the CLI from a USB stick:
创新互联成立于2013年,先为伊通等服务建站,伊通等地企业,进行企业商务咨询服务。为伊通企业网站制作PC+手机+微官网三网同步一站式服务解决您的所有建站问题。
Download the Junos upgrade file to the USB stick.
Locate the USB device ID that Junos is associating to the USB stick:
user@srx> start shell
user@srx% ls /dev/
Insert the USB device into the USB slot. For example, slot 0 would return the following:
root# umass0: USB USBFlashDrive, rev 2.00/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB USBFlashDrive 0100> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 980MB (2007040 512 byte sectors: 64H 32S/T 980C)
Run the following command
user@srx% ls /dev/
Locate difference in outputs to locate drive label. (It will usually be da#s1, i.e. da0s1)
Create a mount directory:
user@srx% mkdir /tmp/usb
Mount the USB to the directory:
user@srx% mount -t msdosfs /dev/<drivelabel, e.g. #da0s1> /tmp/usb
Example:user@srx% mount -t msdosfs /dev/da0s1 /tmp/usb
(there is a space between the label name and /tmp)
Verify that the USB is mounted to the device:root@% pwd
/cf/root
root@% cd /tmp/usb/
root@% pwd
/cf/tmp/usb
root@% ls
junos-jsr-11.4R5.7-export.tgz
Exit shell and install the software:
user@srx% exit
user@srx> request system software add /tmp/usb/<upgrade filename> no-validate no-copy
For additional details regarding a software installation, refer to the instructions at Installing the Software.
Upon completion, reboot the SRX:
user@srx> request system reboot
网站栏目:SRXJunos系统安装更新之一(U盘安装)
转载来源:https://www.cdcxhl.com/article34/igchpe.html
成都网站建设公司_创新互联,为您提供搜索引擎优化、定制网站、静态网站、网站维护、网站收录、网站导航
声明:本网站发布的内容(图片、视频和文字)以用户投稿、用户转载内容为主,如果涉及侵权请尽快告知,我们将会在第一时间删除。文章观点不代表本网站立场,如需处理请联系客服。电话:028-86922220;邮箱:631063699@qq.com。内容未经允许不得转载,或转载时需注明来源: 创新互联