VMWARE中如何创建共享磁盘

1. 创建共享磁盘柜

成都创新互联2013年至今，公司以成都网站建设、做网站、系统开发、网络推广、文化传媒、企业宣传、平面广告设计等为主要业务，适用行业近百种。服务企业客户上千，涉及国内多个省份客户。拥有多年网站建设开发经验。为企业提供专业的网站建设、创意设计、宣传推广等服务。 通过专业的设计、独特的风格，为不同客户提供各种风格的特色服务。

在虚拟机软件的安装目录下，有个vmware-vdiskmanager.exe文件(老版本用plainmaker.exe)，把它复制到共享磁盘柜目录下，创建共享磁盘(老版本共享磁盘文件的扩展名为.pln) F:\虚拟机\共享磁盘柜>vmware-vdiskmanager.exe -c -s 200Mb -a lsilogic -t 2 quorum.vmdk F:\虚拟机\共享磁盘柜>vmware-vdiskmanager.exe -c -s 4Gb -a lsilogic -t 2 sharedisk.vmdk 创建完毕后，目录下有四个新文件 quorum-flat.vmdk quorum.vmdk sharedisk-flat.vmdk sharedisk.vmdk 2. 配置虚拟机 在虚拟机器界面选择“Edit virtual machine settings”à添加硬盘，选“Use a existing virtual disk”，分别添加quorum.vmdk、sharedisk.vmdk 双击新加的磁盘，在弹出的磁盘属性窗选“advance”，为新加的硬盘选择虚拟设备节点：quorum.vmdk选订“SCSI 0:1”，sharedisk.vmdk选定“SCSI 1:1”。 分别打开两台虚拟机目录中的vmx文件，在最后一行添加：

disk.locking="FALSE"

scsi0:1.SharedBus="Virtual"

scsi1:1.SharedBus="Virtual"

vmware中设置共享磁盘，需要满足两个条件：

1、硬盘的高级属性中必须设置成1:0,如果增加第二块共享硬盘，也设成1:0，系统就会报错，所以设置成1:1(这种方式本人还没试过，不过在oracle双机的文章中看到过这样的设置方法)

2、需要在vmware的配置属性文件(如rhel3.vmx)中加入两条属性 scsi[n].sharedBus = "virtual" disk.locking = "false" 系统启动的时候会锁定磁盘，所以当启动linux1后共享磁盘被锁定了，linux2就起不来了,因此需要加入disk.locking = "false" 。 一般来说，如果是scsi1:0，则n为1，也就是scsi1.sharedBus = "virtual" ，表示所有的bus都共享，vmare推荐这种做法。 如果说是不是所有的bus都共享的话，可以将上述scsi1.sharedBus = "virtual"改成scsi1:1.shared = "true" 。

SCSI reservation must be enabled in a virtual machine before you can share its disks. To enable it, make sure the virtual machine is powered off. Open the configuration file (.vmx file on Windows hosts, .cfg file on Linux hosts) in a text editor and add the line scsi[n].sharedBus = "virtual" anywhere in the file, where [n] is the SCSI bus being shared.

VMware recommends you set up the shared disks on their own SCSI bus, which is a different bus than the one the guest operating system uses. For example, if your guest operating system is on scsi0:0, you should set up disks to share on scsi1 bus.

For example, to enable SCSI reservation for devices on the scsi1 bus, add the following line to the virtual machine's configuration file: scsi1.sharedBus = "virtual"

This gives the whole bus the ability to be shared. However, if you would rather not share the whole bus, you can selectively enable SCSI

reservation for a specific SCSI disk on the shared bus. This prevents the locking of this specific disk. Add the following line to the configuration file:

scsi1:1.shared = "true"

If SCSI reservation is enabled (that is, scsi1.sharedBus is set to "virtual"), then this setting is ignored.

In addition to enabling SCSI reservation on the bus, you need to allow virtual machines to access the shared disk concurrently. Add the following line to the virtual machine's configuration file: disk.locking = "false"

This setting permits multiple virtual machines to access a disk

concurrently. Be careful though; if any virtual machine not configured for SCSI reservation tries to access this disk concurrently, then the shared disk is vulnerable to corruption or data loss.

When SCSI reservation is enabled, a reservation lock file that contains the shared state of the reservation for the given disk is created. The name of this file consists of the filename of the SCSI disk appended with .RESLCK.

For example, if the disk scsi1:0.filename is defined in the configuration file as

scsi1:0.fileName = "//vmSCSI.pln"

then the reservation lock file for this disk is given the default name "//vmSCSI.pln.RESLCK"

However, you can provide your own lock file name. Add a definition for scsi1:0.reslckname to the configuration file. For example, if scsi1:0.reslckname = "/tmp/scsi1-0.reslock"

is added to the configuration file, it overrides the default lock file name.

Selecting the DiskOnce SCSI reservation is enabled for a disk — that is, the

scsi[n].sharedBus = "virtual" and disk.locking = "false" settings are added to the configuration file for each virtual machine wanting to share this disk, you need to point to this disk for each virtual machine that wants to access it.

Sharing a Disk on the scsi0 Bus

在vmware中创建共享磁盘

plainmaker已经不用了，现在直接添加磁盘

为一台机器添加一个新的虚拟磁盘，然后再为另一台机器添加一个已存在的虚拟磁盘

然后修改一下两台机器的配置文件，添加如下内容 scsi1.sharedBus = "virtual" disk.locking = "false"

假定两台机器的虚拟磁盘都在scsi1这个总线上。

注意两台机器中要共享的盘的总线和总线地址应该是一样的，并且最好不要和主机操作系统使用的盘在一个总线上。

vmware-vdiskmanager.exe -c -s 1Gb -a lsilogic -t 2 J:\sharedisks\sharedisk1.vmdk

vmware-vdiskmanager.exe -c -s 1Gb -a lsilogic -t 2 J:\sharedisks\sharedisk2.vmdk

vmware-vdiskmanager.exe -c -s 25Gb -a lsilogic -t 2 J:\sharedisks\sharedisk3.vmdk

vmware-vdiskmanager.exe -c -s 25Gb -a lsilogic -t 2 J:\sharedisks\sharedisk4.vmdk

vmware-vdiskmanager.exe -c -s 25Gb -a lsilogic -t 2 J:\sharedisks\sharedisk5.vmdk

vmware-vdiskmanager.exe -c -s 25Gb -a lsilogic -t 2 J:\sharedisks\sharedisk6.vmdk

vmware-vdiskmanager.exe -c -s 25Gb -a lsilogic -t 2 J:\sharedisks\sharedisk7.vmdk

vmware-vdiskmanager.exe -c -s 25Gb -a lsilogic -t 2 J:\sharedisks\sharedisk8.vmdk

文章名称：VMWARE中如何创建共享磁盘
文章源于：https://www.cdcxhl.com/article10/scgigo.html

成都网站建设公司_创新互联，为您提供面包屑导航、建站公司、企业建站、静态网站、商城网站、网站导航

广告

声明：本网站发布的内容（图片、视频和文字）以用户投稿、用户转载内容为主，如果涉及侵权请尽快告知，我们将会在第一时间删除。文章观点不代表本网站立场，如需处理请联系客服。电话：028-86922220；邮箱：631063699@qq.com。内容未经允许不得转载，或转载时需注明来源： 创新互联